|
REUSABLE HOSE
ENDS
These two and three piece fittings are
manufactured for strength and attach directly to Barfell™ diving
hose. The outer sheath screws counter -clockwise onto the hose.
The inner fitting, with the aid of silicone grease, screws
clockwise into the outer sheath and the inner core of the diving
hose.
HOSE ENDS
AVAILABLE
| PRODUCT NUMBER |
HOSE SIZE |
DECRIPTION |
| 2020808 |
8
MM |
9/16 18 UNF FEMALE NUT
WITH MALE INTERNAL CONE |
| 2020809 |
8
MM |
1/4 19 BSP TAPER MALE |
| 2020816 |
8
MM |
1/4 19 BSP PARALLEL
MALE |
| 2020828 |
8
MM |
9/16 18 UNF FEMALE NUT
WITH FEMALE INTERNAL CONE |
|
2020837 |
8 MM |
3/8 UNF
FEMALE |
|
2020840 |
8 MM |
3/8 UNF
MALE |
| |
|
|
| 2020810 |
10
MM |
9/16 18 UNF FEMALE NUT
WITH MALE INTERNAL CONE |
| 2020812 |
10
MM |
1/4 19 BSP TAPER MALE |
| 2020814 |
10
MM |
1/4 19 BSP PARALLEL
MALE |
| 2020830 |
10
MM |
9/16 18 UNF FEMALE NUT
WITH FEMALE INTERNAL CONE |
BARFELL™ DIVING
HOSE
Airdive has suppled
Barfell Diving Hose to industry for over 25 years. Quality stands
the test of time.
 Barfell diving hose is manufactured to
AS2299 and AS1716 and is the hose of choice for most professional
divers. Available in 8MM and 10 MM internal bore Airdive can
supply in standard lengths of 50, 100 and 300 metres, with 50 and
100 metres stocked continuously. When available short lengths
of hose are stocked as well.
Fittings including
Airdive's reusable hose ends, Tema and CEJN couplings, chrome
plated brass "T" fittings, "Y" fittings and a
variety of other adaptors (in stainless steel and chrome plated
brass) can be suppled and fitted if required.
Special length hoses
can be assembled subject to availability.
Barfell is a
trademark of Barfell Industries
| PART
NUMBER |
INTERNAL
BORE |
LENGTH
(METRES) |
|
AB08050 |
8MM |
50 |
|
AB08100 |
8MM |
100 |
|
AB08300 |
8MM |
300 |
| |
|
|
|
AB10050 |
10MM |
50 |
|
AB10100 |
10MM |
100
|
|
AB10300 |
10MM |
300 |
GO TO
LOW PRESSURE FITTINGS
| 