|
201530 INTERNATIONAL YOKE ADAPTOR
The Airdive yoke - 225 Bar DIN adaptor comprises
the Airdive heavy duty yoke fitting and a 225 Bar DIN female
adaptor. This adaptor allows the filling of standard k valve
yoke cylinder valves from a 225 Bar DIN filling control valve.
This adaptor can remain fitted to the DIN filling valve and
removed when required to fill 225 Bar DIN cylinders.
Airdive follows the recommendations of the
Australian Standards and suggests use of this product for cylinder
filling purposes only.
296410
225 BAR DIN MALE TO YOKE BLOCK
ADAPTOR
The 225 Bar DIN - Yoke fill adaptor enables 225
Bar DIN cylinders to be filled using yoke fill control valves.
This adaptor is designed to be used for filling purposes
only. The unit is of heavy duty construction with high
quality chrome finish and manufactured from high strength
brass.
IMPORTANT
NOTE!
Airdive will only supply adaptor systems for
like filling pressures. Serious safety hazards exist when lower
pressure fittings are adapted to fill higher pressure rated
cylinders.
Also note that while DIN 300 regulator first
stages might screw into both 225 DIN and 300 DIN cylinders, this is
not the case with DIN 225 and DIN 300 filling spigots. They
are purpose designed for different filling pressures.
If DIN 300 spigots are screwed into DIN 225
cylinder valve outlets then disengagement of the filling fitting
from the cylinder could occur under pressure causing an obvious
safety hazard to the fill operator. Always inspect thread
engagement, rated fill pressure of cylinder and rated valve working
pressure before filling DIN cylinders. Don't take risks with high
pressure gases.
| 