HIGH PRESSURE ADAPTORS AND BLOCKS

For custom applications, Airdive has a range of adaptors and blocks suitable for a wide range of uses.  Whether you require a yoke block assembly or DIN assembly we have a range of adaptors to suit.

296401

Yoke block to 1/4 BSPP male thread.  Chrome plated high strength brass.  Flat bottom of thread requires 201865250 sealing washer or copper gasket seal. 225 Bar working pressure.

296405

Yoke block to 1/4 BSPP female  Chrome plated high strength brass. Internal flat bottom requires 201865250 sealing washer or copper gasket.   225 Bar working pressure.

201531

DIN 225 Bar female to 1/4 BSPP female inlet. Chrome plated high strength brass. Requires 201865250 sealing washer or copper gasket.  225 Bar working pressure.

201531T

DIN 225 Bar female to 1/4BSPT,female. Chrome plated high strength brass. 225 Bar working pressure.

201548

DIN 300 Bar to 1/4 BSPP female inlet.  Chrome plated high strength brass. Requires 201865250 sealing washer or copper gasket.  300 Bar working pressure.

BLEED BLOCKS

For air line systems requiring an air bleed to be installed, Airdive manufactures a number of bleed block assemblies in 1/4 BSPP and 1/4 BSPT inlet/outlet options. Note that the bleed screw for the block (P/N 201552C) must be ordered separately.

201536

Bleed block bare (no bleed screw).  Chrome plated high strength brass.  1/4 BSPP female ported ends.  Requires 201865250 sealing washer or copper gasket.

201536T

Bleed block bare (no bleed screw).  Chrome plated high strength brass.  1/4 BSPP female to 1/4 BSPT female ports.   1/4 BSPP female port requires 201865250 sealing washer or copper gasket.

DIN SPIGOTS

Airdve can supply a range of DIN spigots in both 225 and 300 Bar for various applications.  All spigots require a 200755 collar nut (shown above).

NOTE  

• 1/4 BSPP with flat base must have sealing washer.

• 1/4 BSPP Cone has female cone (see image above) and will fir directly on the end if a 1/4 BSPP female nut ended hose.

• 1/4 NPT is a taper thread and seals using thread tape.

• All spigots require 200755 collar nut sold separately 

TYPE 11 OXYGEN SPIGOTS / COLLAR NUT

Airdive produces a number of type 11 oxygen spigots.  All spigots use the 295502 collar nut and are rated to 250 Bar working pressure.

• All spigots require 295502 H.P. collar nut (see image).