DIVING MANIFold blocks

A range of low pressure manifold assemblies has been produced for the diver requiring the additional back up of a bail-out system. Whether it be a simple belt manifold or an integrated valve manifold, Airdive can supply something which will provide years of service.

274400T

The Airdive valved belt manifold features and on/off control from the bail-out system, a safety inlet check valve from the surface supply and male and female Tema® couplings. A safety relief is built in to the manifold in case a high pressure leak should develop in the bailout regulator first stage which will prevent airline failure if using an upstream demand valve. The unit is sold complete with safety orange webbing and stainless steel buckle. Features 9/16 bailout inlet, Tema® nipple surface supply inlet and Tema® body outlet to demand valve.

274500B

This heavy duty manifold assembly has four 1/4 BSPT female ports and two 3/8 UNF female ports, and can be belt mounted via the backing plate and dome headed stainless steel screws supplied with the block. The manifold enables a variety of configurations and the 3/8 ports allow use of a buoyancy compensator if required. Additional mounting holes have been provided in the block which enables mounting to a back pack or back plate. The block is hard chrome plated.

ECO MANIFOLD

Just manufactured to compliment our range of low pressure products is this economical low pressure manifold. Designed to mount to 50mm webbing the manifold is available in 1/4 BSPT female to 1/4 BSPT female or 1/4 BSPT female to 3/8 UNF female threads. Manufactured from high strength brass which is then nickle and chrome plated these assemblies will enable a variety of hose attachment combinations.Type your paragraph here.

airdive