airdive

Designed to be used on filling stations where the air control valve is located on the filling panel. The adaptors can also be incorporated into decanting systems for recreational use.

These filling adaptors are available with an international yoke, or a 225 bar or 300 bar Din fitting. The adaptors are fitted with an air bleed screw as there is no on/off control in the adaptor. It is suggested that these only be fitted to shorter high pressure airlines as too much air would be wasted if used for constant filling operations.

If you are filling a large number of cylinders the more economical option in the long term is the Airdive Fill Control Valve, although more expensive to purchase initially.


Model NumberOutlet ConnectionInlet FittingWorking Pressure (BAR)
201510F
INT. YOKE1/4 BSPT FEMALE255
201510
INT. YOKE
1/4 BSPP MALE225 
201520INT. YOKE
16MM X 1.5P225 
201515F
225 DIN1/4 BSPT FEMALE
225 
201515225 DIN
1/4 BSPP MALE225 
201525
225 DIN
16MM X 1.5P225 
201518F300 DIN1/4 BSPT FEMALE300 
201518300 DIN
1/4 BSPP MALE300 
201528
300 DIN
16MM X 1.5P

300 

Open Filling ADAPTORS

201518 300 DIN FILLING ADAPTOR

OPEN YOKE FILL LINE ADAPTOR 201500

The open yoke fill adaptor is designed to fit directly on the end of airlines which have 1/4 BSPP female nut (male internal cone) ends. The adaptor does not have a bleed assembly hence any use of this product requires that the filling panel has a separate air bleed assembly. If used in a decant manifold, some portion of the manifold must have a bleed assembly fitted. The adaptor is also available with an optional neoprene rubber yoke screw (P/N 201500N)

201510 YOKE OPEN FILLING ADAPTOR

Note that the inlet adaptor whether it be 1/4 BSPP M or 16MM X 1.5P has a female internal cone - see below.

201515 225 DIN FILLING ADAPTOR