44 Derwent Park Rd
Glenorchy 7009
Tasmania
Australia
Tel 03 6273 3125 Fax 03 6273 5062 Email Us
DIVING MANIFOLD BLOCKS
A range of
low pressure manifold assemblies has been produced for the
diver requiring the additional back up of a bail-out system.
Whether it be a simple belt manifold or an integrated valve
manifold, Airdive can supply something which will provide years of
service.
274400T
The Airdive
valved belt manifold features and on/off control from the bail-out
system, a safety inlet check valve from the surface supply and male
and female Tema® couplings. A safety relief is built in to
the manifold in case a high pressure leak should develop in the
bailout regulator first stage which will prevent airline failure if
using an upstream demand valve. The unit is sold complete
with safety orange webbing and stainless steel buckle.
Features 9/16 bailout inlet, Tema® nipple surface supply
inlet and Tema® body outlet to demand valve.
274500B
This heavy
duty manifold assembly has four 1/4 BSPT female ports and two 3/8
UNF female ports, and can be belt mounted via the backing plate and
dome headed stainless steel screws supplied with the block.
The manifold enables a variety of configurations and the 3/8
ports allow use of a buoyancy compensator if required.
Additional mounting holes have been provided in the block
which enables mounting to a back pack or back plate. The
block is hard chrome plated.
ECO MANIFOLD
Just
manufactured to compliment our range of low pressure products is
this economical low pressure manifold. Designed to mount to
50mm webbing the manifold is available in 1/4 BSPT female to 1/4
BSPT female or 1/4 BSPT female to 3/8 UNF female threads.
Manufactured from high strength brass which is then nickle
and chrome plated these assemblies will enable a variety of hose
attachment combinations.
