LOW PRESSURE AIRLINES AND FITTINGS

Airdive manufacturers a range of fittings for custom made hose applications as well as our standard build airline assemblies.  Made from high strength brass and chrome plated, these fittings will give many years of reliable service.

All fittings are swaged at the Airdive factory and can be swaged on to any special hose length (part number 202056GH) up to 6 metres.  Contact Airdive for prices of custom made assemblies.

STOCK AIRLINES


Part NumberLength CMFitting 1Fitting 2
202066663/8 UNF M9/16 UNF F
202075
753/8 UNF M
9/16 UNF F
2020991003/8 UNF M
9/16 UNF F
20201251253/8 UNF M
9/16 UNF F
20207475
1/4 BSPT M
9/16 UNF F
202094100
1/4 BSPT M
9/16 UNF F
20206766
1/2 UNF M9/16 UNF F
202077
75
1/2 UNF M
9/16 UNF F
202097100
1/2 UNF M
9/16 UNF F
20208075
9/16 UNF F9/16 UNF F


1/2 UNF LOW PRESSURE AIRLINE FITTING
202087


1/2 UNF male fitting.  This thread is used on a number of imported first stage regulator assemblies. If in doubt measure across the thread to get external dimensions.  This fitting is not sold separately but is swaged in factory as a component of custom made airline assemblies. 

AIRLINE END FITTINGS

3/8 UNF LOW PRESSURE FITTING
202053


3/8 UNF male fitting.  This thread is standard on many older and many new model first stage low pressure outlets.  This fitting is not sold separately but is swaged in factory as a component of custom made airline assemblies

1/4 BSPT LOW PRESSURE AIRLINE FITTING
202083

1/4 BSPT male fitting.  Primarily used for attaching ailine fittings such as Tema® couplings for use in hookah systems. This fitting is not available separately but is swaged in factory as a component of custom made airline assemblies.

LP AIRLINES AND FITTINGS

airdive

3/8 UNF LOW PRESSURE FITTING
202053


3/8 UNF male fitting.  This thread is standard on many older and many new model first stage low pressure outlets.  This fitting is not sold separately but is swaged in factory as a component of custom made airline assemblies

3/8 UNF SWIVEL ADAPTOR
200780


This fitting is designed for special applications where a 3/8 UNF swivel outlet is required from the 3/8 UNF port of a first stage regulator.  The swivel has 3 X 3/8 UNF female ports.  Originally supplied for older first stage regulators with limited low pressure outlet ports, the swivel is now used in a number of custom applications.

75 DEGREE SWIVEL
202015


This 75 degree swivel is designed to fit between the second stage and the low pressure airline.(9/16UMF M to 9/16 UNF F).  The outlet angle of 75 degrees is fixed, however swivel action ensures easy movement of airline and demand valve.  This item is not imported and is manufactured at the Airdive factory.  Every single swivel is pressure tested to 1000PSI before leaving the factory.  Uses 1 X 210010N70 O seal (BS010 N70.  Can be supplied with oxygen compatible O seal if required.

3/8 UNF FEMALE LOW PRESSURE LOW PRESSURE FITTING
202051


3/8 UNF female fitting. Special application fitting sometimes used in airline extension when no other option is available.  This fitting is not sold separately but is swaged in factory as a component of custom airline assemblies.

3/8 UNF LOW PRESSURE FITTING
202053


3/8 UNF male fitting.  This thread is standard on many older and many new model first stage low pressure outlets.  This fitting is not sold separately but is swaged in factory as a component of custom made airline assemblies

1/4 INCH ID LOW PRESSURE AIRLINE
202056GH


1/4 inch internal diameter low pressure airline.  400PSI working pressure.  Purchased as part of a custom made airline assembly the airline is sold in per customer specification up to 6 metres in length.  The airline is not sold separately but is available with  factory swaged fittings as part of custom made airline assemblies

9/16 UNF LOW PRESSURE AIRLINE FITTING
202057


9/16 UNF female low pressure fitting.  Fits most second stage regulators.  This fitting is not sold separately but is swaged in factory as a component of custom made airline assemblies.